Fiber Optic Test Equipments

Building Diagnostic Thermal Imager

Approx Price: Rs 40,000 / Piece 
Product Details:
  • Temperature Measurement Range: -10 Deg C to +250 Deg C (14 Deg F to 482 Deg F)
  • Temperature Measurement Accuracy: +- 2 Deg C or 2 % (at 25 Deg C nominal, whichever is greater)
  • Focus Mechanism: Focus-free 1.2 m (4 ft) and beyond

Building Diagnostic Thermal Imager Ultra sleek, intelligent design meets the performance you need for building diagnostics. Searching for air leaks, hidden moisture, construction defects, or other building issues? TiR105 Thermal Imager delivers a huge competitive advantage—it allows you to work faster, more efficiently and document your findings right away.

Find and report problem areas to your clients right away with peace of mind:

  • Feel: Ultra-sleek design developed for building diagnostic applications makes driving your thermal imager safe, easy and more fun.
  • Technology helps identify problem areas and torch to assist in illuminating dark spaces.
  • Report: Included SmartView® software assisting you to document your findings and customize your reports

  • Experience the ultra-sleek intelligent design developed for you - rugged, ergonomic, lightweight, point–and–shoot, focus-free imager
  • Find air leaks, hidden moisture, construction defects, or other building issues faster and easier with IR-Fusion® technology
  • Capture current measurements fast and conveniently from up to five wireless modules at once using your thermal imager and CNX wireless modules.
  • Use both Picture-in-Picture, Full Visible and Full Infrared for reporting and validation of work
  • Illuminate dark places such as electrical cabinets and poorly lit mechanical rooms with integrated torch
  • Show where the problems exist with the laser pointer
  • Enjoy non-stop thermal imaging with field replaceable battery


General Specifications:

IR resolution (FPA size)

160 x 120 FPA Uncooled Microbolometer

Spectral band

7.5 µm to 14 µm (long wave)

Capture or refresh rate

9 Hz

NETD (Thermal sensitivity)

≤ 0.08 °C at 30 °C target temp (80 mK)

FOV (Field of view)

22.5 °H x 31 °V

IFOV (Spatial resolution)

3.39 mRad

Built-in visual camera

Yes, get the context of visible light details in your images

Alignment options

NEAR: <23 cm (9 in) from target FAR: >23 cm (9 in) from target

Field of view

28° x 28° — the tight field of view lets you see more detail in your target

IR Fusion ® technology

PIP (1.2 m (4 ft) to 4.6 m (15 ft)), FULL IR, FULL VISIBLE

Color alarms

Standard palettes

Blue-Red, Ironbow, Grayscale, Amber

Focus system

Focus free

Infrared heat map and visual image blending

Yes, five blending modes on camera and continuous blending in SmartView® software

Additional Information:
  • Item Code: TiR105

Fiber Optic Test Equipments

Approx Price: Rs 35,000 / Piece 
Product Details:
  • Universal Wavelength Setting: 1 nm steps
  • Universal Optical Interface: Supports all 2.5 mm and 1.25 mm connectors
  • Recalibration Period: 3 year

Fiber Optic Test Equipments are especially designed to meet the test related specific demands of laboratories. These are engineered for fiber optic test. These are manufactured as per international industrial standard and under the firm direction of expert quality controllers. These are available in various range and technical specifications as per the precise demands and requirements of clients.

What are thje features of fiber optic test equipments:
  • Cost-effective, rugged and high performance solution
  • Auto λ detection and TwinTest mode
  • Internal data storage and optional PC download capability

Microwave Oven Door Endurance Testing Machine

Product Details:
  • Display Mode: True color liquid crystal display(standard configuration of 7 inch display control touch screen)
  • Holder Construction: Top grade aluminum alloy sections
  • Driver: Stepper motor
  • Test Station: Single (vertical and horizontal opening are switchable)
  • Working Power Supply: AC 220V 50HZ
  • Touch Screen Settings: 0-99999s adjustable, it will automatic stop when reach the number of times
  • Output Power: 2000W
  • Open and Close Time: Touch screen settings ,0-9999S adjustable

Our Microwave Oven Door Endurance Testing Machine is designed as per the IEC60335-2-25 parameter. This microwave oven door endurance testing machine is designed to inspect the wear resistance of the microwave door system. It may include the structure of the hinge and microwave seals. It is equipped with humanized touch screen operator interface, PLC control system and the rotational angle of oven door. This microwave oven door endurance testing machine is extensively used for testing of horizontal and vertical opening of the door. It is integrated with liquid crystal touch screen and stainless steel manipulator.

Technical Specifications:

Control mode

PLC control

Test station

Single (vertical and horizontal openingare switchable)

Open/close speed

Touch screen settings, adjustable

Opening door angle

Touch screen settings ,0-180° adjustable


One working station (left opening door orswing-up door)

Opening door lock

Eccentric gear machine structure automatically open or lock the door




Equipped with power socket of 10A,for the specimen work under 2000W

Conforming to standard

IEC60335-2-25 clause 18

Handheld OTDR

Approx Price: Rs 1.25 Lakh / Piece 
Product Details:
  • Display Type: TFT LCD
  • Testing Dead Zone: - Less Than 1.6m
  • Resolution: 0.25m
  • Sampling Point: 65534
  • Data Output: Double USB interfaces, supporting USB stick and direct cable download to PC via ActiveSync
  • File Format Support: Supporting Bellcore GR196

Handheld OTDR is manufactured as per international standard and available in three different measuring models including manual mode (including real time mode and average mode), auto mode and dead zone mode. These find their wide applications to measure the physical characteristics of optical fiber under test, including length, the splice loss and the transmission loss. These are especially designed to locate the faults of breaks of optical fiber. Handheld OTDR are designed to offer three wavelengths and VLF in one handheld unit, and also for testing passive optical network (PON) in FTTx. These are straightened with comfortable Gallus which make these very convenient to carry.

  • Model No:- SAT 18C
  • Handheld, lightweight and convenience for carrying
  • The most advanced technology of double-color & material integrative mould in trade.
  • Advanced anti-reflective TFT LCD, visible clearly in field
  • 1.6 m extra-short event dead zone
  • Communication light check automatically
  • 0.25m high resolution, 65534 sampling points
  • Fast auto measurement, one button operating
  • Double USB interfaces, supporting USB stick and direct cable download to PC via ActiveSync
  • Supporting Bellcore GR196 file format in writing or reading
  • Function of intelligent indicating of remaining capacity of battery and warning if the voltage of battery is low.
  • Built –in lithium battery with high capacity for over 10 hours of operating life
  • Visible fault locating (VFL)
  • Unique function of updating system on-line, returning to factory is unnecessary

Cable Fault Locator

Approx Price: Rs 70,000 / Piece 
Product Details:
  • Vertical Gain Range: 80 dB
  • Accuracy: +/-2%
  • Measurement Range: 0~8 km (Full-automatic)
  • Working Temperature: -10~ 50 Deg C
  • Storage Temperature: -30~ 70 Deg C
  • Humidity: 5%-90% (non-condensing)
  • Input Protection: +/- 400 V pk
  • Dimensions L x W x H: 220 x 162 x 48mm
  • Weight: 0.95kg

The SAT-8C Cable Fault Locator is used for locating the faults like localization of break, cross and poor electric insulation in telephone cables, coaxial cables and other high frequency cables. It works on advanced electronic measurement technology, which integrates with megohmmeter, ATDR, automatic bridge and resistance meter. The instrument is used while construction and line maintenance in the telecom industry.

  • Model No:- SAT 8C
  • Pulse reflection and intelligent bridge testing method with full-automatic and manual testing functions.
  • Testing for insulation resistance and loop resistance. Insulation reach up to 50 MΩ.
  • Automatically judge the line state: break, cross, poor electric insulation and the high voltage.
  • DAGC (Digital Automatic Gain Control) and DWAR (Digital Waveform Automatic Recognize), it can automatically judge the wave form.
  • Field calibration function correct speed and line diameter parameter of unknown cable, correct length of known cable, automatic store the correction factor).
  • Default 0.32mm, 0.4mm, 0.5mm, 0.6mm’s telephone cables.
  • Store 10 testing waveforms, and upload results to PC, reviewing analyzing and printing.
  • Two waveforms comparison function
  • With USB interface.
  • Built-in lithium battery, and its working 6 hours.

Pulse reflection:

  • Testing accuracy: 1 m for measurement range = 2 km
  • Accuracy ±2% 8 m for measurement range = 2 km
  • Accuracy ±2%
  • Testing dead zone: 0 m
  • Pulse width: 60ns-10µs automatic adjustment
  • VOP: 0 ~ 300 m /µs
  • Impedance 135 Ω ( accuracy 1% )

Bridge testing method:

  • Poor insulation resistance: 0~50?O
  • Testing length: Full length 9999m Sectional 9999m×3 sections
  • Testing error: 1% × Full length of line With megohmmeter and ohmmeter’s functions

DMM Technical index:

  • Insulation resistance: 0 ~ 50?O Minimum resolution: 10 kO, accuracy: ±3%
  • Loop resistance: 0 ~ 9 kO. Minimum resolution: 0.1 O, accuracy: ±3%
  • Voltage: AC/DC voltage 0 ~ 250V. Minimum resolution: 0.1V, accuracy: ±5%
  • Capacitance: 0-1.3uF. Minimum resolution: 1nF, accuracy: ±5%

Power Supply:

  • AC Power: External AC power supply / Charger
  • Battery: Built-in 2Ah lithium-ion rechargeable battery
  • Working time:6 hours
  • Charging time: 4 hours

Physical parameters:

  • Screen: 640 x 480 pixels and TFT touch color screen With USB and RJ11 interface

Optical Laser Source

Approx Price: Rs 18,000 / Piece 
Product Details:
  • Working Wavelength: 1550 nm
  • Output Power: 0, -3, -6 (dBm)
  • Spectrum width: Less than/-5 nm
  • Output Stability: +/-0.03dB/15min; +/-0.05dB/8h
  • Output Mode: CW, 270Hz, 1KHz, 2KHz
  • Optical Identifying Distance: 5km; 10km /15km optional (650nm)
  • Display: LCD
  • Auto Turn off Time: 30~99mins or none
  • Interface: FC, SC, ST

  • Complete functions, easy operation
  • High sensitivity and reliability
  • Highly accurate measurement is used in the field and laboratory
  • Test the optical transmission system, attenuation and fiber
  • Be compatible with other optical instruments
  • Low battery alarm
  • LCD display
  • High Sensitivity, Multi Output Power
  • Multi Wavelength Optional, up to Four Wavelengths on Two Ports
  • Automatic Power Off, Off Time Setting Range 20 – 90 minutes
  • Low Battery Alarm
  • New Type Conductive Rubber Switch, Suitable for Different Operation Environments

Additional Information:
  • Item Code: SAT-3E

Optical Laser Source

Approx Price: Rs 14,000 / Piece 
Product Details:
  • Display Type: LCD
  • Weight: 0.3 kg
  • Dimensions: 140mm X 72mm X 38mm
  • Storage Temperature: -40~ 70 Deg C
  • Working Temperature: -10~ 50 Deg C
  • Luminous Parts: LD
  • Interface: FC, SC, ST
  • Auto Turn off Time: 30~99 mins or none

Optical Laser Source is very easy to use, control and maintain. These are microprocessor based instruments admired for ergonomic design and consistent performance. These are manufactured using latest techniques and following international industrial standard. Optical laser source ensures accurate measurement and excellent performance.

General characteristics:
  • Model No:- SAT 3E
  • Complete functions, easy operation
  • Multi wavelength Optional, up to Four Wavelengths on Two Ports
  • Auto Power Off, Off Time setting range 20-90minutes
  • High sensitivity and reliability
  • Highly accurate measurement is used in the field and laboratory
  • Test the optical transmission system, attenuation and fiber
  • Be compatible with other optical instruments
  • Low battery alarm


  • Cost-effective, rugged and compact solution
  • Interchangeable connectors for maximum flexibility available
  • Auto λ and Twin Test transmission modes
  • 3 year calibration
  • Combines up to 4 wavelengths in one instrument (SM+MM)

Technical Specifications:


Technical parameter



























Wavelength (mm)

Output Power (dBm)

1310/1550: 0, -3, -6; 650: >0; 850/1300/1490/1625: -6(error: ±0.2)

Spectrum Width

= 5nm

Output Stability

±0.03 dB/ 15min; ±0.05dB/8h

Output Mode

1310/1550: CW, 270 Hz, 1KHz, 2KHz; 650/850/1300/1490/1625: CW

Optical Identifying Distance

5 km; 10km / 15 km optional (650nm)

Power Supply

Two AA 1.2 V nickel-hydrogen rechargeable batteries or two AA 1.5 alkaline batteries

Optical Cable Identifier

Approx Price: Rs 24,000 / Piece 
Product Details:
  • Frequency: 50 Hz
  • Battery Type: Polymer lithium battery
  • Usage: Laboratory

Optical Cable Identifier In the pipeline, channel, well and overhead environments, use single core optical fiver to accurately identify far-end cables; machine room construction, pipeline reform, cable cutting and connecting, regular management, resource survey and on-duty and maintenance of communication operators


  • Small size, portable design, touch screen and shortcut keys
  • Orientate the target cable by loop back far-end knocking test with single fiber or single-double fiber
  • Strong on-spot application capacity can meet the demands of accurately searching the target cable when looking over the directly-buried cable and pipe cables or cutting cables
  • Monitor the mechanical vibration conditions of the far-end cables
  • Orientate the target cable through audio or visible signal in a comprehensive environment
  • Optimize the equipment parameters automatically and applicable to testing lines with different length
  • VFL port, orientate the target cable accurately
  • Large capacity polymer lithium battery, provides long working time

Additional Information:
  • Item Code: SAT-210

Handheld OTDR

Approx Price: Rs 1.5 Lakh / Piece 
Product Details:
  • Battery Type: Lithium battery
  • Battery Work: Up to 10 hours
  • Dynamic Range: From 26dB to 35dB at 1310/1550nm


  • Handheld, light weight and convenient for carrying
  • The most advanced technology of double-colour and material integrative mould in aspect
  • Advanced anti-reflective TFT LCD display can be clearly seen in field
  • Auto test, manual test and real time test
  • Speed curve analysis and multiple curves comparison
  • 1.6m extra short event dead zone
  • Visual fault locating (VFL)
  • Universal FC/SC/ST connector type, convenient for surface cleaning
  • USB interface supports USB flash disk to transfer data
  • SC card interface supports SC card to transfer data
  • Machine memory can save 1000 data, support manual and auto save data
  • Support bellcare GR196 and SR4731 format
  • Battery status indication and low battery power alarming
  • Automatic turn-off, turn off time can be adjusted

Additional Information:
  • Item Code: SAT-18C
Looking for Fiber Optic Test Equipments ?
Share Us:
© SGM Lab Solutions Private Limited
Desktop Site Back to top